Amazon Price:$82.00$57.47You save:$24.53 (30%)(as of January 8, 2020 6:12 pm – Details). Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on the Amazon site at the time of purchase will apply to the purchase of this product.
The 10-inch Freud LU83R010 Thin Kerf Combination Saw Blade supplies a setup that sets level teeth and alternating-top-bevel teeth to make sure strong efficiency both when tearing and when crosscutting. Also offering TiCo high-density carbide ideas, laser-cut, anti-vibration ports that remove the requirement for stabilizers, and Freud's protecting, Perma-SHIELD coating, this multi-purpose blade is built for lasting convenience.
LU83R010 Thin Kerf Combination Saw BladeAt a Glance: Ideal for crosscutting products 3/4 to 3-1/2 inches thick, as well as ripping products 3/8 to 1-1/2 inches thickHeavy-duty plate with laser-cut, anti-vibration slotsTough Perma-Shield coating minimizes rubbing as well as warmth buildupTechnical Specs: CoatingPerma-SHIELDDiameter10" Teeth50 COMBArbor5/8" Kerf (K).091 Plate (P).071 Thin Kerf calls for less power and also enables faster feed rateLaser-Cut Anti-Vibration Slots significantly reduce resonance and sidewards activity in the cut extending blade life, and providing a crisp, remarkable finishCombination Tooth Design for Versatility and also Accuracy This thin-kerf blade's 50 teeth are prepared in groups of five, each of that includes one flat-top raker tooth for quick, precise ripping. Each flat tooth is followed by four alternating-top-bevel (ATB) teeth that are particularly well suited to crosscutting, and huge craws in between the teeth make sure reliable chip clearance.
This blade is created for optimal performance when crosscutting products that are 3/4 to 3-1/2 inches thick, or tearing materials that are 3/8 to 1-1/2 inches thick. It makes fast job of hard- and also softwood, plywood, and chipboard. It can also manage laminates or tackle thinner or thicker materials. Nonetheless, some loss of surface coating may happen when it is made use of outside its perfect array. It has a 5/8-inch arbor and also creates a. 091 kerf.
And also due to the fact that thin-kerf blades eliminate much less product than basic carbide blades, they allow for faster feed times, and also they need less horse power to create smooth, precise results when reducing.
Well-Balanced, Anti-Vibration Design This Freud blade is accuracy well balanced and also pretensioned for truer cuts under heavy tons. It also includes laser-cut, anti-vibration ports that minimize babble for a cleaner finish, longer blade life, as well as minimized sound while you function. As well as due to the fact that the entire blade is laser cut from high-strength steel, you can trust that it will remain secure, level, as well as real, even after prolonged usage. In addition, this healthy, anti-vibration layout suggests there's no requirement to make use of add-on stabilizers with this blade.
High-Density Carbide for Maximum Cutting Performance This thin-kerf saw blade's 50 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "combination blend." Created to aid the blade keep a sharp reducing edge for longer when faced with a range of applications, this mix includes simply a little bit more high-density tungsten carbide than various other TiCo blends. And also it still offers the full mix of improved rust resistance, warm resistance, as well as effect resistance that you anticipate from TiCo.
With teeth that start out sharper as well as provide enhanced edge retention, the blade can go much longer in between sharpening, as well as will hold up longer– saving you time and money.
Perma-SHIELD Coating Reduces Friction and also Heat Buildup Constructed to endure challenging use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD– a non-stick covering that reduces friction and also almost removes the warm buildup that excess friction can create. By providing full thermal insulation, this covering shields your devices and also your work surface. As well as it stands up to binding when the blade is used for large-volume reducing applications, which reduces blade warp.
As a lubricating function, Perma-SHIELD permits the blade to spin openly while lowering tension on the motor and carriage of your saw. Furthermore, this finish helps avoid debris collection and also material or "pitch" buildup. Since gummy pitch build-up triggers added drag out the motor of your saw, much less build-up is an additional little ease that equates right into longer device life and longer blade life. It likewise implies less downtime for blade cleansing, so you get jobs done faster.
This commercial saw blade is backed by Freud's limited life time guarantee.
About Freud: A History of Innovative Manufacturing An industry leader for greater than 50 years, Freud America, Inc. is a manufacturer and marketing expert of exceptional carbide reducing tools for the woodworking industry. Freud is just one of minority manufacturers of woodworking devices on the planet that generates its very own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and also Cobalt.
By producing their very own carbide, Freud has the unique capability to formulate each device for every particular application, thus making best use of the cutting life and also performance of the tool. Freud's full line of top quality, woodworking devices includes saw blades, router little bits, shaper cutters, power tools, and also extra.
What's in the Box Freud LU83R010 Thin Kerf Combination Saw Blade– 10-inch size, 5/8-inch arbor, 50-tooth COMBO design.
Privacy & Cookies Policy
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.