Milescraft 1309 DowelJigKit & 1319 JointMate
Self Centering Dowel Jig Tips and Tricks
DIY Simple Dowel Jig
How To Make A Joint With Dowels Without A Jig.
Make a Simple Doweling Jig
841/851 Doweling Jig Instructional Video Surface to End Joint
The Rockler Complete Doweling Kit
Using a Doweling Jig Beginners #17 a woodworkweb video
Doweling together a cabinet
01 – Dowelling Jig Instructions – Making a Door Frame
The doweling jig is a simple and straightforward device, it is intended to assist you in centering and aligning dowels on stock that is nominally 5/8", 3/4" or 1 inch. thick.
There are 3 threaded holes on the jig, each threaded hole will center on one of the above mentioned stock thickness, 5/8" . 3/4" or 1 inch.
The jig also comes with 3 bushings to correspond to the thickness of the drill bit, The bushings are intended to be attached to the threaded hole that centers on the stock.
Full instructions included for edge doweling, right angle doweling and surface doweling.
3 x brad point drill bits 1/4" – 5/8" – 3/8"
3 x drill bit collar stops & hex wrench
3 x steel drill bushings 1/4" – 5/8" – 3/8"
6 x dowel center points
A set of wood dowels