- Woodpeckers MT Doweling Jig (Retired OneTIME Tool®)
AUTOTOOLHOME Center Gauge as well as Doweling Jig conveniently and also accurately discover the center of a board's edge whenever; no measuring as well as no tedious trial and error changes required.This makes it the excellent tool for both mortise and also tenon design as well as boring very accurate lined up dowel joint holes.
This design device takes all the guesswork out of precisely marking-out mortise and tenon joints that are centered exactly on your supply. Based on the never-fail dependability of a parallelogram, the Center Gauge includes 2, precision-machined parallel arms that quickly get used to the stock thickness, placing the facility bar dead center on the material. Simply use a pencil, noting blade or scribe tool to define the facility bar location on your supply- as well as you're done!
To change to doweling setting, eliminate the marking bar and also connect the doweling jig bar. To use, simply line up the precision-machined notches on the jig's doweling bar with the dowel area mark on your board, hold the jig and drill. Glide the jig to the next location, straighten and drill. No demand to clamp the jig or tighten up knobs.
Product: Aluminum alloy6061( drill overview ） as well as steel (bushing).
Surface therapy: Anodic oxidation therapy.
Material of drill bushing: Steel HRC50 °.
Bushing Size: 6mm, 8mm, 10mm (3pcs each dimension, millimeter ).
Situating Dowel Pin: 6mm, 8mm, 10mm.
Drill Guide Size: 23.5 × 15 × 6cm/9.2 × 5.9 × 2.3".
Package consist of.
1 x Self Centering Doweling Jig.
1 X 6mm dowel Pin.
1 X 8mm dowel Pin.
1 X 10mm dowel Pin.
3 X 8mm Drill Sleeve.
3 X 6mm Drill Sleeve.
3 X 10mm Drill Sleeve.